Teledyne 2103Ci Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 74

Teledyne 2103Ci Скачать руководство пользователя страница 12

2103 Modem Module
Section 1 Introduction

1-6

1.4 Safety Symbols and

Hazard Alerts

This icon identifies a general hazard and is accompanied
with details about the hazard. The instruction manual
identifies the hazardous condition and any steps nec-

essary to correct the condition. The manual presents this infor-
mation in one of two ways:

CAUTION

Cautions identify a potential hazard, which if not avoided, may
result in minor or moderate injury. This category can also warn
you of unsafe practices, or conditions that may cause property
damage.

WARNING

Warnings indicate potentially hazardous conditions. If you

do not avoid these risks, they could cause you death or
serious injury.

1.5 Technical Service

Although Teledyne Isco designs reliability into all of its

equipment, there is always the possibility of a malfunction
occurring. You can use this manual to help in diagnosing and
repairing any malfunctions. If the malfunction persists, call or
write the Teledyne Isco Technical Service Department for assis-
tance:

Teledyne Isco
Technical Service Department

P.O. Box 82531
Lincoln, NE 68501
866-298-6174 or 402-464-0231
FAX: 402-465-3001
e-mail: [email protected]

Simple difficulties can often be diagnosed over the phone. If it is
necessary to return the equipment to the factory for service,
please follow the shipping instructions provided by the Technical
Service Department, including the use of the Return Authori-
zation Number specified. Be sure to include a note describing the
malfunction. This will aid in the prompt repair and return of the
equipment.

«
...
10
11
12
13
14
...
»

Содержание 2103Ci











































































Отзывы:

Нет отзывов