WaveLink Series Differential Probe (13-25 GHz)
Con n e ct in g t he Pr obe t o a Te le dyn e Le Cr oy Oscilloscope
The WL-PLINK-A platform/cable assembly has been designed for use with the ProLink interface of
Teledyne LeCroy's LabMaster 9 Zi-A, WaveMaster 8 Zi/Zi-A, SDA/DDA 8 Zi/Zi-A, WavePro 7 Zi/Zi-A,
SDA/DDA 7 Zi/Zi-A, and other models that use the ProLink interface. The WL-2.92MM is for use with
the 2.92mm interface of the LabMaster 10 Zi, LabMaster 9 Zi-A, and WaveMaster/SDA/DDA 8 Zi/Zi-A
models.
Con n e ct in g a W L- PLI N K- A t o a n Oscilloscope
Attach the WL-PLINK-A platform/cable assembly to the ProLink interface by aligning the connector
with the input connector and pushing the interface toward the instrument.
A click is heard when the probe interface latches to the test instrument. The probe also uses
thumbscrews to secure the interface to the instrument.
Do not overtighten the thumbscrews.
Remove the platform/cable assembly from the instrument by unscrewing the thumbscrews and
moving the interface up and down while pulling gently until a click is heard. This click indicates the
platform/cable assembly is detached from the instrument.
Con n e ct in g a W L- 2 .9 2 M M t o a n Oscilloscope
The WL-2.92MM Platform/Cable Assembly connection consists of a LEMO connector for power and
communication and a 2.92mm signal input connector. Make corresponding connections (LEMO,
2.92mm, via included cable) to the corresponding connections on supported oscilloscopes.
Con n e ct in g a W L- 2 .9 2 M M t o a n Oscilloscope usin g t h e
LPA- 2 .9 2 m m t o Pr oLin k Ada pt e r
Some Teledyne LeCroy oscilloscopes utilize both ProLink and 2.92 mm inputs. In this case, a single
WL-2.92MM Platform/Cable Assembly can be used for all types of high bandwidth inputs. Use the
LPA-2.92mm to ProLink
Adapter to connect the WL-2.92MM to a ProLink communication, power
and signal interface.
18