Teledyne Lecroy PCI Express Gen4 x4 U.2 Скачать руководство пользователя страница 8

Страница: 8 / 8

Gen4 U.2 Interposer

Support bracket

Trademarks and Servicemarks

Teledyne LeCroy, PCIe Protocol Suite, PCIe Protocol Analysis and

Summit T416 and Summit T48 are trademarks of Teledyne LeCroy.

All other trademarks are property of their respective companies.

Changes

Product specifications are subject to change without notice.

Teledyne LeCroy reserves the right to revise the information in this

document without notice or penalty.

Copyright

Part Number: 930402-00 Rev D

This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Teledyne LeCroy Customer Support

Online Download
Periodically check the Teledyne LeCroy Protocol Solutions Group

web site for software updates and other support related to this

product. Software updates are available to users with a current

Maintenance Agreement.

Web:

E-mail:

Support:

Environmental Conditions

•

Temperature: Operating 32° F to 122° F (0° C to 50° C)

•

Temperature: Non-Operating 14° F to 176° F (-10° C to 80° C)

•

Humidity: Operating 10% to 90% RH (non-condensing)

Содержание PCI Express Gen4 x4 U.2








