PCI Express
®
Gen4 x4 U.2/U.3
Single/Dual Port Interposer
User Manual and
Quick Start Guide
Components
The interposer package includes the following components:
•
PCI Express Gen4 x4 U.2/U.3 Single/Dual Port Interposer
•
3.5 Inch conversion bracket kit
•
DC Power Adapter (+12V @ 3A)
•
User Manual and Quick Start Guide (this document)
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage. In the
event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.
Introduction
Use this document for quick installation and setup.
Teledyne LeCroy’s PCI Express Gen4 x4 U.2/U.3 Single/Dual Port Interposer provides a quick and simple means for
protocol analysis of Solid State Drives (SSDs) based on PCI Express (PCIe
®
) protocols. The U.2/U.3 Interposer Card,
used with a Summit Protocol Analyzer, enables PCIe bus traffic between a host backplane and SSD device to be
monitored, captured, and recorded for protocol analysis. The card is compatible with the Summit T416 and Summit T48
and supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s. The interposer supports side band signals such
as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT). The interposer can be used with Single x4 Port or
Dual x2 Ports. It also supports U.2 and U.3 standards.
PCI Express Gen4 x4 U.2/U.3 Single/Dual Port Interposer
1
2