Insert the Phillips head screw through the bracket flange and attach it to the server. Slide the Interposer into the server. Then
align the External latch bracket’s thumb screw to the screw hole in the Interposer as shown below:
Insert and tighten the large thumb screw to secure the flange and Interposer to the server chassis. See diagram below.
Lever Latch Installation
If the server has been designed to use a Lever latch, a Lever latch has been supplied with the Interposer and can be attached
to the interposer as shown in the following diagrams. The first step to install the Lever latch is flip the interposer on its back
to access the bottom cover. Locate the top right screw on the bottom cover as shown in the following diagram.
Screw to attach
the flange to the server
Thumb screw to
attach the flange to
the interposer
Bottom cover
Top Right
Screw