Teledyne Lecroy OE695G, Руководство оператора

Страница: 21 / 24

Operator’s Manual
15
A
USTRALIA
& N
EW
Z
EALAND
D
ECLARATION OF
C
ONFORMITY
- EMC
The converter complies with the EMC provision of the Radio
Communications Act per the following standards, in accordance with
requirements imposed by the Australian Communication and Media
Authority (ACMA):
AS/NZS CISPR 11:2009/A1:2010, IEC 55011:2009/A1:2010 Radiated and
Conducted Emissions, Group 1, Class A.
A
USTRALIA
/ N
EW
Z
EALAND
C
ONTACTS
:*
RS Components Pty Ltd.
Suite 326 The Parade West
Kent Town, South Australia 5067 RS Components Ltd.
Units 30 & 31 Warehouse World
761 Great South Road
Penrose, Auckland, New Zealand
* Visit teledynelecroy.com/support/contact for the latest contact information.
Safety Compliance
EC Declaration of Conformity – Low Voltage
The converter meets the intent of EC Directive 2014/35/EU for Product
Safety. Compliance was demonstrated to the following specifications as
listed in the Official Journal of the European Communities:
IEC/EN 61010-031:2015 Safety requirements for electrical equipment for
measurement, control and laboratory use – Part 031: Safety requirements
for handheld probe assemblies for electrical measurement and test.
Environmental Compliance
End-Of-Life Handling
The converter is marked with this symbol to indicate that it complies
with the applicable European Union requirements to Directives
2012/19/EU and 2013/56/EU
on Waste Electrical and Electronic
Equipment (WEEE) and Batteries.
The converter is subject to disposal and recycling regulations that vary by
country and region. Many countries prohibit the disposal of waste electronic
equipment in standard waste receptacles. For more information about
proper disposal and recycling of your Teledyne LeCroy product, visit
teledynelecroy.com/recycle.
Restriction of Hazardous Substances (RoHS)
This product and its accessories conform to the 2011/65/EU RoHS2
Directive.