TELEDYNE API T200U NOy, Руководство оператора

Страница: 18 / 38

Model T200U NOy Option Manual Addendum
16
07303E DCN7996
3.3 Initial Operation
If you are unfamiliar with the T200U NOy analyzer, we recommend that you read
the principles of operation in Section 4.1 of this operation manual before
proceeding.
1. After confirming proper supply voltage, turn on the power to the analyzer and
to the 501 NOy pump pack, and plug in the external Pump.
•
The front panel displays should immediately light as the instruments start
up.
•
The 501 NOy requires about 30 minutes for the external Converter to come
up to operating temperature.
Caution
The internal Converter components will become
extremely hot and must be allowed to cool after
power-off before being touched.
•
The T200U NOy requires about 30 minutes for the ozone generator to start
up. During that time the instrument will not respond to span gas.
•
After 30 min, the display on the 501 NOy front panel should read 315
o
C,
indicating that the external Converter is at operating temperature.
•
Follow the instructions in the T200 Manual and the T200U Addendum to
confirm proper operation of the analyzer.
2. Proceed to Section 5 of this T200U NOy manual to perform a Zero/Span
check.