TELEDYNE API T200U NOy, Руководство оператора

Страница: 15 / 38

Model T200U NOy Option Manual Addendum
07303E DCN7996 13
8. Connect the pneumatic cable fitting from the calibrator to the 501 NOy rear
panel ( Figure 2 ).
9. Also, connect the EXHAUST port of the analyzer rear panel to the external
Pump.
10. Connect the circular power and signal cable from the external Converter’s
umbilical cable assembly to the CONVERTER POWER connection on the rear
of the 501 NOy.
11. Connect the three-prong thermocouple connector from the umbilical cable
assembly to the THERMOCOUPLE connection on the rear of the 501 NOy.
12. Connect the analyzer and 501 NOy AC power cords from their AC power
receptacles to the correct line voltage (refer to power specs on the respective
rear panel label).
WARNING!
•
Lethal voltages are present inside the chassis.
•
Do not operate with cover off during normal operation.
•
Before operation, check for correct input voltage and frequency.
•
Do not operate without proper chassis grounding.
•
Do not defeat the ground wire on power plug.
•
Turn off power before disconnecting electrical subassemblies.