TeleDart GmbH & Co. KG, Obere Heide 8, 67368 Westheim, Germany
knob when you have got the desired pressure. The pressure regulation knob returns
automatically to the 0-position.
If you have got too much pressure, you can correct this easily. Just turn the pressure
regulation knob in direction of the “-“ position until you have got the desired pressure.
The pressure regulation knob does not return automatically to the 0-position if you
release pressure. It has to be turned back by hand.
Pistol and gun have both a safety valve which opens automatically if you exceed the
allowed maximum pressure (pistol 10 bar, gun 16 bar).
We want to point out that a manipulation of the safety valve immediately ceases our
guarantee and that we do not assume any liability for damages of persons or material.
The safety valve is engineered to protect your applicator from damages caused
by dangerous overpressure. The exceeding of the particular maximum pressure
into the red marked area of the manometer can cause damages to your
applicator. Damages to material, which are proven to be caused by deliberate
exceeding of the maximum pressure ceases our guarantee!
We want to point out that also a manipulation of the safety valve immediately
ceases our guarantee and in this case we do not assume any liability for
damages to persons or material.
•
Loading of the dart syringe
Unscrew the loading screw and insert the syringe into the barrel from behind.
Push the dart syringe the inside barrel using the positioning pin situated at the loading
screw and screw it again.
•
The shooting
The applicator is now ready for shooting. The safety can now be activated.
Turn the turning knob of the safety into the “F”- position. Now fix your aim.
The trigger has a trigger pressure point and allows a precise shooting.
Immediately after shooting put back the applicator on safe - turn knob of the safety to
the position “S”.
4.
Care
You can clean the applicator with a moist cloth if the applicator gets dirty.
Never use chemical cleaners.
Check if there is dirt inside the barrel. If necessary brush it dry with the cleaning tool.
Grease the barrel inside to avoid rust.
5.
Maintenance
Special maintenance is not necessary.