Telecom Let's Go, Быстрый старт

Страница: 12 / 16

10
9.1 WiFi Network Connection
Setting up a WiFi network requires your modem’s
Network Name
and
Wireless
Key. You can connect most devices to your pre-installed WiFi following these steps:
1. Open the WiFi connection manager software, such as Wireless Network
Connection Manager in Microsoft Windows computer or AirPort in Apple
Mac computer.
2. Scan for available WiFi networks.
3. Find your modem’s
Network Name in the list of available WiFi networks
and select it. Example: TELECOM123456.
4. Enter your modem’s
Wireless Key
when prompted. Example: 1234ABCDEF.
5. If your wireless network connection manager allows you to save your
Network Name
and
Wireless Key
details then do so. This enables you to
connect automatically. Otherwise you may have to repeat these steps each
time you connect.
6. If the details are correct, you will connect and be WiFi capable.
Telecom has step-by-step WiFi set up assistance for Microsoft Windows,
Apple Mac, Apple iPhone, Google Android and Blackberry-powered
devices at
www.telecom.co.nz/wifisetup
9.2. WiFi Connection using WPS (WiFi Protected Set-Up)
This modem supports WPS which is a simple method of connecting a wireless
device to the modem. The connecting device must support WPS and have wireless
turned on. Check your device manufacturer’s website to confirm WPS support.
To connect, press the WPS button on the modem and within 1 minute, press
the WPS button on the connecting device.
The WPS button will be physical (on a device like a printer) or virtual software
button (on a computer-type device such as a mobile phone, laptop or tablet).
The two devices will establish a connection and the device will be remembered
by the modem.
14-0 03932 DEVICE Instruction Guide TG587n 125x160 CS4_16pp.indd 10 6/11/12 4:12 PM