
DataRoute voice User Manual
38
Disable DHCP Server
– turn off the built-in DHCP server. If the DHCP server is disabled all
clients will need to have manually assigned IP addresses in order to connect.
Enable DHCP Server
– turn on the built-in DHCP server
Start/End IP Address
– enter the range of IP addresses that the DHCP server can assign
to clients. These IP addresses must be in the same subnet as the IP address assigned to the
DataRoute voice.
Leased Time
– enter the duration for the lease of DHCP IP addresses (default is 24 hours)
Static DNS Server
– enter an IP address for a DNS server to pass to DHCP clients. By
default this is set to the IP address of the DataRoute voice to use the built-in DNS server
(recommended).
Get DNS Server from WAN
– select to pass the DNS server addresses obtained
automatically from the WAN interface to the DHCP clients.
Configure the second IP address
– select to assign an additional IP address to the
DataRoute voice (advanced option).
Notes:
1.
When you use the DHCP Server, please make sure you don’t have multiple DHCP
Servers in one LAN.
2.
To view a list of clients that have been assigned addresses by the DHCP server go to
the path
DHCP
->
Assigned Leases
3.
To reserve an IP address within the DHCP range for a client so that the client always
receives the same IP address go to the path
DHCP
->
Static Leases
. Click the
Add
Static Lease
button and enter the MAC address and required IP Address for the client.
Make sure that the IP address chosen is within the range entered on the LAN Setup
page.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299