
26
www.behnke-online.com
GB
IP camera Instructions
Introduction
GB
1.5. Connecting the IP camera
LAN connection
Usually, an RJ-45 connector is used to establish
a LAN connection ( page 27 + 28). When
operated with the series 20 IP basic electronics
*
,
the network connection can also be established
via the series 20 IP basic electronics
*
. To do so,
connect the camera module's RJ-45 socket to
the socket marked „Port2“ of the Series 20 basic
electronics
*
using a patch cable.
Power supply
Power for the Behnke IP camera is supplied via
the ethernet port (PoE). When operated with
the series 20 IP basic electronics
*
, power for
the camera is supplied via PoE from the IP basic
electronics.
Illumination
Cameras featuring illumination ring (20-2906A-IP,
21-2906A-IP, 43-9588, and 50-2906A-IP)
are equipped with an additional power cable
( page 27 + 28) to supply the illumina-
tion unit. Continuous power supply is possible.
Alternatively, you may use your SIP door inter-
com's relay 2 to supply power for the illumination
unit. You may choose from any form of configu-
ration to be realised via the SIP door intercom's
relay operations modes.
*
20-0001A-IP, 20-0002A-IP, 20-0013A-IP, 20-0014A-IP, 20-0016A-IP, 20-0041A-IP, 20-0043A-IP
Содержание 20-2906A-IP
Страница 18: ...18 www behnke online de D Notizen Note ...
Страница 36: ...36 www behnke online com GB GB Notizen Note ...
Страница 54: ...54 F www behnke online fr Notice caméra IP Notizen Note ...
Страница 55: ...55 F www behnke online fr Notice caméra IP Notizen Note ...