Telecom Behnke 20-2906A-IP, Инструкция по эксплуатации, Страница: 22 / 56

22 www.behnke-online.com
GB
IP camera Instructions
Introduction
GB
1.
introduction
1.1. What’s in the box
▸ IP camera module
▸ Patch cable directly connected to the camera
▸ Password to access the camera (to be found on
the camera cover and in the present manual)
▸ The present instructions
1.2. General Information
Features
The Behnke camera module integrates an Axis
M3045 type camera behind a series 20, 30, or 50
Behnke Telecom modular system or as a 43-9588
reverse side camera.
The camera provides full HD video images with
a resolution of up to 1920 x 1080 pixels. A maxi-
mum of 25 images per second may be transmit-
ted, regardless of resolution settings. The camera
may be integrated into standard video surveil-
lance systems. The camera is also equipped with
an LED illumination ring
(20-2906A-IP / 21-2906A-IP, 43-9588 /
50-2906A-IP) for use in
poorly lit areas.
The 43-9582 reverse side mounting option uses an
AXIS M3007 type camera. For technical specifica-
tions regarding the camera, please cf. page 31.
The 43-9582A reverse side mounting option inte-
grates an AXIS M3047-P type camera. For technical
specifications regarding the camera, please cf.
page 32.
The 43-9582B reverse side mounting option
integrates an AXIS M3067-P type camera.
For technical specifications regarding the
camera, please cf. page 32.
The video may be transferred to a video surveil-
lance system via HTTP or via RSTP streaming.
The camera provides an open interface (VAPIX).
The corresponding documentation is available
on the AXIS Communications website. Motion-
JPEG and H.264 are available as compression
methods.
The M3045 AXIS camera type supports AXIS
firmware version 7.20.1 and shall only be used
with this version.
The M3007 AXIS camera type supports AXIS
firmware version 6.30.1 and shall only be used
with this version.
The M3047-P AXIS camera type supports AXIS
firmware version 8.40.3 and shall only be used
with this version.
The M3067-P AXIS camera type supports AXIS
firmware version 9.55.1.2 and shall only be used
with this version.
Determine the camera position
Please note the following advice on camera
position when installing your Behnke door
intercom system:
In order to receive an image
feed, you need a lot more than to simply point
the camera in the direction of an object or a