Telecom Behnke 20-0040, Инструкция по эксплуатации

Страница: 17 / 40

17 www.behnke-online.de
Instruction PA-system - add-on amplifier
Configurations 20-0040
GB
2.
configurAtions
20-0040
* ▸ Enter set-up mode
0000 ▸ Enter security code
06 1 to 9# ▸ Setting the volume (Please note: Do not use configuration step 07.
This will result in a change of the LF level at the LF output. Please always
follow the technical specifications of any amplifier available on site.
)
900 1 # ▸ Enable advanced configurations
PA mode
967 0 # ▸ inactive
or
967 1 # ▸ Answer a call without a ring-tone but with a beep
or
967 2 # ▸ Answer a call without a ring-tone and without a beep
or
967 3 # ▸ Answer a call without a ring-tone but with a beep for the calling party only
(V 1.30 or later)
* ▸ Exit configuration mode
2.1. 20-0040 PA operation
Always use configuration step 06 to change the
volume for a Behnke intercom station with PA
amplifier.
Please note: Never use configuration step 07
(“add-on amplifier”, built-in 1 Watt add-on
amplifier). This configuration step may damage
the PA amplifier.
For additional configuration steps, e.g. in case
of acoustic feedback etc., please cf. the basic
electronics manual or the technical manual
respectively. Both are available for download at:
www.behnke-online.de/downloads/anleitungen