Teleco Voyager Digimatic 50, Руководство по установке и инструкция пользователя

Страница: 13 / 24

Switch DSF80E on by
setting its power
switch to
"ON"
Select a satellite to point
(e.g. ASTRA 19E )
by pressing the
button
SAT
Lift your dish to reach the elevation
corresponding to the vehicle location
(check the elevation map)
Turn the dish
SOUTHWARDS until
DSF80E emits a
continuous "BEEP"
sound.
1) Switch on and prepare the SAT receiver and the TV set for reception following
the instructions of their respective manufacturers.
2) It is critical to make sure that there are no obstacles (e.g. houses, trees etc.) between the
antenna and the satellite southwards.
3) Check in the table supplied the elevation relative to the town closest to the place where
you are located.
INSTRUCTIONS FOR USE
12