Teleco TVNRG868E04, Инструкция по установке

Страница: 17 / 20

17
This procedure configures the time of activation of the courtesy light (internal and external, if present).
The default time is 90 seconds . It is possible to set the time from 60 seconds to 12 hours.
30 seconds timeout 5 seconds timeout
Press P3 button of a memorized transmitter and hold it for
5 s. The buzzer sounds 1 beep.
Release and press it again 5 times within 5
seconds and hold it for 2s. The buzzer sounds
3 beeps Press once P3 to start the
counting of time. The buzzer
sounds 1 beep
Press again P3 to stop the
counting after the desired lapse.
The value will be memorized by
the control unit
In case of time-out, the control unit will sound four beeps and exit the procedure automatically.
This procedure configures the time lapse between complete opening and the automatic closure (if enabled).
The default time is 30 seconds . It is possible to set the time from 5 seconds to 180 seconds.
30 seconds timeout 5 seconds timeout
Press P3 button of a memorized transmitter and hold it for
5s, the buzzer sounds 1 beep
Release and press it again 8 times within 5
seconds and hold it for 2s, the buzzer sounds
2 beeps Press once P3 to start the
counting of time. The buzzer
sounds 1 beep.
Press again P3 to stop the
counting after the desired lapse.
The value will be memorized by
the control unit
In case of time-out, the control unit will sound four beeps and exit the procedure automatically.
COURTESY LIGHT TIME SETTING
6.2
8x
( x1)
P3
memorized
P3
memorized
P3
memorized
P3
memorized
( x5)
ON
START
STOP
keep it
pressed
for 5s
keep it
pressed
for 2s
AUTO - CLOSE TIME SETTING
6.1
8x
( x1)
P3
memorized
P3
memorized
P3
memorized
P3
memorized
( x8)
ON
START STOP
keep it
pressed
for 5s
keep it
pressed
for 2s
*
P3 button is located inside the transmitter. Every time P3 is pressed the lights switch ON.