2
DANGER
Hi-Voltage
Attention:
High-Voltage board, risk of electric shock!
Never touch the board outside the safety zone.
The output are protected by
3.15A
fuses.
If not used, close cable glands with their caps.
Heatsink wired to ground
Wiring diagram
Safety Low-
Voltage Zone
Terminal Contact
M7
wired input T5
wired input T6
M8
wired input T7
wired input T8
ANT
aerial connection
Terminal Contact
M1
1: Line
2: Neutral
3: Main GND
4: GND
M2
5: GND for L1
6: GND for L2
7: GND for L3
8: GND for L4
M3
9-10: Load (L1)
11-12: wired input T1
M4
13-14: Load (L2)
15-16: wired input T2
M5
17-18: Load (L3)
19-20: wired input T3
M6
21-22: Load (L4)
23-24: wired input T4
-
T1, T2, T3, T4
: ON/OFF and DIM the load
Short pulse (<400mS) = ON/OFF
Long pulse (>400mS) = adjusting upgrade or
downgrade if the output set in dimming mode
-
T5, T6, T7, T8
: ON/OFF and DIM the load
Short pulse (<400mS) = ON/OFF
Long pulse (>400mS) = adjusting upgrade or
downgrade if the output set in dimming mode
Note:
it is possible to connect more push-buttons
in parallel mode to the same input.
The receiver has four wired safety low voltage
input and four wired high voltage input with the
same functions:
Содержание TVDMM868A05
Страница 16: ......
