Teleco TVDMM868A05, Руководство пользователя

Страница: 10 / 16

10
a. The 4/7/42 channel transmitter is associated to more than one output. No other input available.
4- Hold down CH4 or CH7 button for 5
sec. At the end only the load connected
to the selected output will turn on at the
new value.
1- Press the button relative to the scene to modify.
All the output associated to this transmitter will
turn the load on at the preset value.
2- Press P4 to select the output to modify
(the selection will be indicated by the
relative led ON). ATTENTION: the next
steps must to be executed within 60
seconds!
3- Adjust the new value:
• keeping P1 pressed to Dim UP/DOWN
• ( 4ch. transmitters) keeping the button relative to the
scene to modify pressed to Dim UP/DOWN
• (
7/42ch
. transmitters) use the buttons CH5, CH6 to
Dim UP/DOWN
Only the selected output will change its intensity.
Press P4
to select the output
OR
Press
Adjust Adjust
Keep pressed
to DIM
5 sec. press 5 sec. press
b. The 4/7/42 channel transmitter is associated to more than one output and there are also wired
safety low voltage input (T5 .. T8) to command the output.
2- Adjust the new value with the wired
button connected to the output to modify
(T5 = OUT1, T6 = OUT2, T7 = OUT3,
T8 = OUT4).
Note: It’s not possible to use the high voltage input for this procedure.
Keep pressed
to DIM
1- Press the button relative
to the scene to modify. All
the output associated to this
transmitter will turn the load
on at the preset value.
Press
3- Hold down CH4 or CH7
button for 5 sec. At the end
only the load connected to the
selected output will turn on at
the new value.
5 sec. press 5 sec. press
CH1
CH2
CH3
CH4 CH7
CH1
CH2
CH3
CH4
7/42 CH. 4 CH.
T5 T6 T7 T8
CH7
CH1
CH2
CH3
CH4
7/42 CH. 4 CH.
CH5
CH6 CH1
CH2
CH3
CH4
7/42 CH. 4 CH.
CH1
CH2
CH3
CH4