Teleco Motostat digimatic 65, Руководство по установке и инструкция пользователя

Страница: 13 / 24

Check that the elevation shown on
the DSF80E display coincides exactly
with that obtained at point 3. If not, use
the UP and DOWN buttons in order to
reach it.
Hold down the
“UP” button until 3
beep sounds are
emitted by
MotoSat. The
antenna will go up
to the latest stored
position setting
MotoSat will
automatically store
the latest antenna
elevation value to
facilitate pointing
operations.
Switch DSF80E on by
setting its power
switch to
"ON"
Select a satellite to point
(e.g. ASTRA 19E )
by pressing the
button
SAT
1) Switch on and prepare the SAT receiver and the TV set for reception following
the instructions of their respective manufacturers.
2) It is critical to make sure that there are no obstacles (e.g. houses, trees etc.) between the
antenna and the satellite southwards.
3) Check in the table supplied the elevation relative to the town closest to the place where
you are located.
INSTRUCTIONS FOR USE
12