Teleco GSM700, Руководство пользователя

Страница: 3 / 8

3
By means of a SMS it’s possible to command the outputs, checking their status, activating some
functions or modifying system parameters. The default password is “ 12345 ”, but it can be modified with an SMS.
Notes:
• SMS commands are NOT case sensitive.
• If any SMS not reported in the table below is received (e.g., credit info), the device forward the same
SMS to the first number memorized in the telephone book.
• According to the standard used in a specific country, it could be necessary write the telephone numbers
with the international dialing codes or just with a “0” before.
• The device replies to the configuration SMS with another SMS (“OK”) and to the command SMS with a
phone call.
5 - COMMANDS BY SMS
n. DESCRIPTION SMS TEXT
1
GSM CONNECTION CHECK
Reply: SMS (“System OK”) + call
password,
CKE
2
MEMORIZING A PHONE NUMBER FOR COMMAND BY CALL
Max. memorizations: 300 numbers
Syntax: it’s possible to memorize one single number (e.g.
12345,MAC,xxxxxxxxxxxx
) or more (maximum 10), separated
by commas, for each SMS.
Furthermore
it’s possible to memorize one number (or more)
that will be valid just for a limited number of commands: in order
to activate this function add to the number the parameter “U”,
followed by the validity (number of commands).
(e.g.
yyy
= valid for yyy commands)
password,
MAC,xxxxxxxxxxxx,
xxxxxxxxxxxx,.........
password, MAC,xxxxxxxxxxxx,
xxxxxxxxxxxxUyyy,.........
3
DELETING A PHONE NUMBER FOR COMMAND BY CALL
Syntax: it’s possible to delete one number (e.g.
12345,DAC,xxxxxxxxxxxx
) or more (maximum 10), separated
by commas, for each SMS.
password
,DAC,xxxxxxxxxxxx,
xxxxxxxxxxxx,.........
4
DELETING ALL THE PHONE NUMBERS FOR COMMAND BY CALL
Syntax: the command DAC must be followed by the valid
password, repeated 2 times.
password,
DAC,
password,
password
5
MEMORIZE A NUMBER IN THE TELEPHONE BOOK
Syntax: x = position in the telephone book (1-8).
y = telephone number (max. 19 digits).
Notes: the telephone book has 8 positions maximum. The
numbers memorized in the telephone book have both alarm calls
and SMS activated by default. If a position is already occupied, it
is overwritten.
password
,TEL,x,
yyyyyyyyyyyy
6
DELETE A NUMBER IN THE TELEPHONE BOOK
Syntax: x = position in the telephone book to delete (1-8).
password,
DEL,x
7
LIST OF NUMBERS IN THE TELEPHONE BOOK
The device sends the list of the numbers with their position.
password, NUM?
8
ACTIVATION OF ALARM SMS FOR A SPECIFIC NUMBER
Syntax: the command SMS is followed by the positions in the
telephone book (from 1 to 8 max.) of the numbers for which is
required to activate the function (e.g.
SMS145
activate the sms
sending for the numbers at positions 1,4 and 5). This function
sends only automatic sms relative to the input activation.
Note: All the numbers memorized by means of the command
TELx have this function activated by default.
password
,SMS,xxxxxxxx
5.1 - SMS for preliminary operations
= MEMORIZED NUMBERS, ENABLED FOR COMMANDS BY CALL = TELEPHONE BOOK NUMBERS