Telecast Viper II TR5900, Руководство пользователя

Страница: 4 / 10

4
WARNING
Laser Safety
WARNING!
Class 1 Laser. Do not stare into a connector port or fiber.
Laser Radiation
The unit is a CDRH Class 1 laser device. Although this means it is eye safe, you must avoid looking
directly at, or staring into, the laser beam located on an ST connector or on the end of a fiber.
Infrared radiation is produced at the fiber connection port on the front of the unit and at the end of
unterminated optical fibers that are attached to this port. Avoid any direct exposure to the light that
comes from these sources.
Do not enable the laser when there is no fiber attached to the fiber connection port.
Do not attempt any type of service to this instrument other than what is instructed in this manual.
Refer servicing to Telecast Fiber Systems, Inc.
FCC Part A Manual Notice
This equipment has been tested and found to comply with the limits for a Class-A digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their own expense.
Warning CE
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
- Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you
to dangerous voltage or other hazards.
- Keep the module away from liquids.
Spillage into the module may result in fire, electrical shock, or equipment damage. If an object or
liquid falls/spills into the housing, unplug the module immediately. Call Telecast and request an
RMA (Return Materials Authorization) number.
-
Do not allow powered modules of the same link to come into physical contact
.
Telecast 5950’s are designed for long distance connections using a pair of two modules, isolated
electrically. Touching the powered ends two modules at the same time may result in an electrical
shock.