Switching the base unit on / off
Switching on
Switching off
1.
Switch the mains power supply on.
2.
Power on the base unit by pressing the
grey power button on the back of the unit for
roughly 3 seconds.
3.
You will see the lights on the unit run
through a cycle and then your alarm will be
ready to use.
(Only the red ‘alarm’ button should be
illuminated.)
The base unit uses very little power, we advise
keeping it switched on at all times.
If it is necessary to switch the unit off, follow
these steps:
1.
At the back of the unit you will find a grey
power button.
2.
Press the button for 3 second and release.
(You will hear a beep and the base unit will
power down).
