Telebyte 458-3SLB Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 46

Telebyte 458-3SLB Скачать руководство пользователя страница 21

Model 458-3SLB (3-Slot Chassis)

Page 16

Installing IP Address Assignment Software

The IP address assignment software (Lantronix Device Installer) is obtained from the CD supplied
with your unit or downloaded from

www.telebytebroadband.com

(select Support/Software option). It

is then copied to the remote PC and expanded. After installation, it is used to assign an IP address to
the XPort.

Obtain the IP address and subnet mask for the XPort from your network administrator as it is needed
during the assignment process. In addition, note the MAC address of the XPort which  is located on
the back of the 458-3SLB. This address allows the assignment software to locate the XPort.



In some cases, firewall protection on the PC may interfere with the installation or

assignment process. If this occurs, contact your network administrator.

Install Software

1. Save the

4583SL-Ethernet-Install.zip

file to the desktop.

2. Extract the files and then navigate to the folder on the desktop.

3. Double-click on the setup_di_x86x64cd_4.3.0.1.exe program file.

4. Select the language.

«
...
19
20
21
22
23
...
»

Содержание 458-3SLB















































Отзывы:

Нет отзывов