TA
-
833
0
Installation Manual
Last Revised:
5/9
/12
21
Panasonic Series 10/11/12 with IMP
-
/DTB
-
Tuner Card
Follow the cable connection diagram below.
ASM DIP Mode: UP
-
DWN
-
UP
-
DWN
Configure TV:
Go into HOTEL MODE (<MENU>, <G>, <Y>, <0>), set
MODE=ON, BUTTO
N
LOCK is OFF.
Configure IMP
-
/DTB
-
Tuner Card: Press <Channel Up>, <Right Arrow>, <Left Arrow>,
<MUTE> to enter set
-
up screen. Go to Control Options and AUX pane
l. Set BAUD Rate to
1152
00. Go to Service Options, verify the HDMI Terminal Card is assigned to
Slot 1.
Special Notes:
The ASM Installation Kit contains an RS232 3.5mm
control cable. Use this cable for the TV’s Control
connection.
To use the charging feature of iDock, make sure
to
connect the
USB Power Supply to a wall outlet
.
Legacy Panasonic Displays
These models require an Enseo IMP
-
or DTB
-
Tuner Card in Slot 2/3 as well as the Panasonic TY
-
FB10HMD Dual HDMI Terminal Card in Slot 1.
Audio 2RCA to 3.5mm Y
-
Adapters (TeleAdapt
CAB
-
4066D12
) are also required for this
application.
If connecting to a legacy OnCommand system
(OCV), TV will require Panasonic firmware
v1.090+. Follow schematic and ASM DIPs as
shown ans select TA Control=EXTERNAL in the TV
menu settings.
Be sure the ASM DIP Swi
tches are set to the
appropriate positions:
Содержание TA-8330 iDock
Страница 1: ......
