TA
-
833
0
Installation Manual
Last Revised:
5/9
/12
20
Panasonic North America
For
Panaso
nic North America
Series 20/30 Hospitality or ProDisplays with serial control
Follow the cable connection diagram below.
ASM DIP Mode: DWN
-
UP
-
UP
-
DWN
Configure TV:
Go into HOT
EL MODE (<MENU>, <G>, <Y>, <0>).
S
et MODE=ON, BUTTON
LOCK is OFF
, TA CONTROL=O
FF
.
For Series 30, also set CP MODE=YES.
Special Notes:
The ASM Installation Kit contains an RS232
3.5mm control cable. Use this cable for the TV’s
Control connection.
To use the charging feature of iDock, make sure
to
connect the
USB Power Supply to a wall outlet
.
For Panasonic Series 20 Displays
If using the Internal Terminal Adapter for
LodgeNet, you will need to make sure the TV is
loaded with Panasonic firmware v1.080+. Follow
schematic and ASM DIPs as shown and select
TA Control=INTERNAL in the
TV menu settings.
If connecting to a legacy OnCommand system
(OCV), TV will require Panasonic firmware
v1.090+. Follow schematic and ASM DIPs as
shown ans select TA Control=EXTERNAL in the
TV menu settings.
For ProDisplays
Some Series 20/30 ProDisplays
may require a
terminal card for AV connections and control.
Follow instructions for the TV+IMP/DTB, but
connect the HDMI to the TV’s native HDMI port.
Be sure the ASM DIP Switches are set to the
appropriate positions:
Содержание TA-8330 iDock
Страница 1: ......
