TA
-
7630 and TA
-
7730 Installation Manual
Last Revised:
9/30/11 10:47 AM
21
Philips HFL 2009
/2010
Models
For nnHFLD/27, nnHFLV/27 a
nd nnHFLL/27 models
MediaHub
Active DIP
Mode
10:
UP
-
DWN
MediaHub
Active Firmware
Version:
XP0.3NA
Configure TV:
Using
guest remote control, enter the set
-
up menu by pressing
<3>, <1>, <9>, <7>, <5>, <3>, <MUTE>. Under Communications, set
SP
-
SP1
to RS232 Serial port. Select SAVE and Baud Rate will default to 9600.
Philips HF Legacy Models (that support SmartPort)
Special note: MediaHub Active auto
-
switching only supported if SmartPort is available.
This installation replaces the RS232 cable conne
ction with the
Mini Connector
-
SmartPort
cable, plugged into TV’s SmartPort (RJ11).
MediaHub
Active DIP
Mode
10:
UP
-
DWN
MediaHub
Active Firmware
Version:
XP0.3NA
Configure TV:
Using guest remote control, enter the set
-
up menu by pressing
<3>, <
1>,
<9>, <7>, <5>, <3>, <MUTE>. Under Communications, make sure
SP
-
SP1 is set. Select SAVE and Baud Rate will default to 9600.
Philips HFL/HF Models with an External PPV STB
Follow Direct
-
to
-
TV installation instructions according for Philips HFL/HF models a
bove.
Connect the PPV STB AV Out to TV’s HDMI1 port. Connect MediaHub HD’s HDMI to TV’s
HDMI2.
2008 and Other Legacy
Philips HFL/HF Models
(using Philips CP Cable Set)
Connect Philips CP Cable Kit Set to MediaHub and Philips TV as follows:
HDMI cable
: Med
iaHub HDMI to TV HDMI1
3.5mm
PC Audio cable
: MediaHub PCAudio port to TV PCAudio
VGA
PC Video cable
: MediaHub PCVideo port to TV VGA
3.5mm
CVBS cable
: MediaHub CVBS port to TV AV1
DB9
RS
-
232 serial cable
: MediaHub RS232 to TV RS232
RJ11
SmartPort cable (
o
nly used
for
legacy models)
Switches Settings are in the appropriate positions according
to below:
For nnHFLD/27, nnHFLV/27 and nnHFLL/27 models
MediaHub
Active DIP
Mode
10:
UP
-
DWN
MediaHub
Active Firmware
Version:
XP0.3NA
Configure TV:
Using
guest
remote control, enter the set
-
up menu by pressing
<3>, <1>, <9>, <7>, <5>, <3>, <MUTE>. Under Communications, set SP
-
SP1
to
RS232 Serial port. Select SAVE and Baud Rate will default to 9600.
Содержание TA-7630
Страница 1: ......
