TA
-
7630 and TA
-
7730 Installation Manual
Last Revised:
9/30/11 10:47 AM
19
Panasonic Series 20 using Internal Terminal Adapter
This installation requires Panasonic Series 20 firmware version 1.080. Follow
instructions above for Series 20 ins
tallation.
MediaHub
Active DIP
Mode
10:
UP
-
DWN
MediaHub
Active Firmware
Version:
EN0.2T7
Configure TV:
Go into HOT
EL MODE (<MENU>, <G>, <Y>, <0>).
S
et
MODE=ON, BUTTON LOCK is OFF
, TA CONTROL=INTERNAL
.
Panasonic Series 10/11/12 with IMP
-
/DTB
-
Tuner
Card
See Figure 1 on left
-
This installation requires an IMP
-
/DTB
-
Tuner Card in Slot 2/3
and the Panasonic TY
-
FB10HMD Dual HDMI Terminal Card in Slot 1.
Audio Y
-
Adapters
CAB
-
4066D12 also required for this application (2RCA to 3.5mm).
MediaHub
Active
DIP
Mode
01:
DWN
-
UP
MediaHub
Active Firmware
Version:
EN0.2T4
Configure TV:
Go into HOTEL MODE (<MENU>, <G>, <Y>, <0>),
set MODE=ON, BUTTON LOCK is OFF.
Configure IMP
-
/DTB
-
Tuner Card: Press <Channel Up>, <Right Arrow>,
<Left Arrow>, <MUTE> to enter
set
-
up screen. Go to Control Options and
AUX panel. Set BAUD Rate to 9600. Go to Service Options, verify the HDMI
Terminal Card is assigned to Slot 1.
Figure 1:
C
able connection diagram for installing
MediaHub Active with
Panasonic TV and an IMP
tuner card.
Содержание TA-7630
Страница 1: ......
