Tele System TS6810 T2 STEALTH Скачать руководство пользователя страница 14

TELE System 

10 

Rename Channels 
To rename a channel, press the B

BLUE  button (

Edit

) and then the G

GREEN button (

Edit

), then type in the new name 

through the alpha-numeric keys on the remote control and the functions available on screen on the input window. Then 
press the Y

YELLOW (

OK

) to confirm. Press E

EXIT to exit and save the changes. 

Delete Channels 
To remove a channel from the list, press the B

BLUE  button (

Edit

), then again the B

BLUE button (

Delete

), highlight the 

channel from the list and press O

OK. Press E

EXIT to exit and save the changes. 

NOTE 

The deleted cleared will be reloaded on the list following an update channels or a reinstallation of the entire channel list 
(section. 3.3). 

3.2.2

 

Delete All 

Utility to delete all channels. 

3.3

 

Installation menu 

During the first installation an automatic channel scan of the available channels is performed. Periodically, upon 
activation of new television and radio services or modifications by broadcasters, we suggested that you reinstall or 
update the channel list of the receiver. 

3.3.1

 

Channel Scan 

Manual scan function on a single frequency. Select the channel/frequency (item 

Channel No.

), then press O

OK on S

Search 

to execute the search. 

3.3.2

 

Automatic search 

Channel scan function on all available frequencies: 
1.

 

Country:

 Definition of the country in which the receiver will be installed. 

WARNING 

The incorrect setting of the C

Country may result in a partial or even a failure to identify and save channels. 

2.

 

FTA Only

: possible restrictions of scanning only for broadcast in the clear/free (Yes) or (No). 

3.

 

Search

: Press O

OK on this menu item to reinstall the whole channel list. 

WARNING 

When you do this, previous channel list will be cleared. 

3.3.3

 

Autoscan in Standby 

Function dedicated to the configuration of the automatic channel list Update during standby mode. It can be 
enabled/disabled using the parameter 

Autoscan in Standby

 (

On

/

Off

) and also programmed by entering with the number 

buttons 0

0÷9 on the remote control at a new time ( 

hh

:

mm

) at the 

Autoscan in Standby Time

 parameter. 

3.4

 

System Setup menu 

3.4.1

 

Language 

The following items are available: 
1.

 

Language

: language of the menu shown on the screen (On Screen Display - OSD). 

2.

 

First Audio

: Main audio language for the TV programs. 

3.

 

Second Audio

: Secondary audio language for TV programs, to be used in the absence of the main one. 

4.

 

Subtitle language

: language subtitles for TV shows. 

NOTE 

The proper functioning of the receiver in relation to the above audio and subtitle preferences is conditioned by the 
presence of this information which is transmitted at the discretion of the broadcasters of the channel you are tuned in to. 

3.4.2

 

TV System 

This menu has the following audio and video settings to be adjusted in accordance with the characteristics of the 
audio/video devices plugged into the receiver: 
1.

 

Video resolution

: setting of the video resolution of the HDMI digital audio and video output. 

 

 

Содержание TS6810 T2 STEALTH

























Отзывы: