English
TS6810 T2 STEALTH
9
6.
Duration
: Timer duration.
Save data entered/changed by pressing the O
OK button on the screen
Save
(or click
Cancel
to stop inserting/changing the
timer).
3
Section for advanced use
WARNINGS
Changing some parameters of the menu may impair the correct functioning of the receiver itself. Therefore, carefully
read through this section of the manual before proceeding with any adjustments.
To avoid tampering, some functions are protected by a security code directly defined by the user during first installation
(see paragraph 1.4).
During normal TV program vision, by pressing M
MENU on the remote control, the m
main Menu will appear on the screen,
where the following submenus can be found:
1.
Media Player
2.
Edit Channel
3.
Installation
4.
System Setup
5.
Tools
GENERAL RULES FOR NAVIGATION
To navigate through the various menu use:
x
The arrow keys
,
,
,
to select menus, menu items, and options.
x
The O
OK button to open a selection/a submenu or confirm a choice.
x
The keys 0
0÷9
9 to insert an alphanumeric value.
x
The E
EXIT button, in general, allows you to leave a menu or return to the preceding the current window.
Also refer to any indications given in the various menus, specifying how to implement a function via a button on the
remote control.
3.1
Media Player menu
This menu is dedicated to personal media playback via USB. Refer to the section in this manual concerning USB
functions (section 2.6).
3.2
Change Channel menu
3.2.1
TV/Radio channel list
Menu for editing the channel list.
Favorite Channels List
To create a favorite channels list, press the F
FAV button, select the desired channel in the list, press O
OK and select
favorite list to which you want to add the channel, then press O
OK to confirm and E
EXIT. Repeat for the other channels to
add to the Favorites list, and then press E
EXIT to exit and save the changes.
While in viewing mode, to call up one of the created favorite lists, use the F
FAV key. Alternatively, while in the channel list,
use the arrow keys
/
on the remote control to change channel group.
Channel Lock
To protect a channel manually, resulting in a viewing access via entry of a user-defined system PIN entry before
installation (section 1.4), press the R
RED (
Lock
), highlight the channel from the list, press O
OK and enter your PIN. Press
EXIT to exit and save the changes.
Skipping Channels
You can mark one or more channels to be skipped during channel changing with the buttons C
CH +/C
CH- on the remote
control. Press the G
GREEN button (
Skip
), highlight the channel from the list and press O
OK. Press E
EXIT to exit and save the
changes.
Moving Channels
To move a channel, press the Y
YELLOW button (
Move
), select the channel you want to move from the list and press O
OK. At
this point, the channel move function behavior changes depending on if the LCN mode (section 1.4) is active or not. In
particular, if LCN is active will prompt the user to enter the position number, and, if taken, the positions of the two
channels in question will be exchanged. Instead, if the LCN is off, you must move the selected channel with the arrow
keys
/
and press O
OK to release it and place it in the chosen location. Press E
EXIT to exit and save the changes.
