English
TS6206 DT
5
3 First time installation
When all the connections on the receiver are ready (section 2.2) and the main lead is plugged in, the
receiver will start up automatically. If this does not happen, press the ON button on the front panel of the
receiver or on the remote control. A easy installation menu will be displayed where you can set different
parameters and then run the channel scan:
1.
OSD Language
: Use the arrow / buttons to select a language for the On Screen Display menu
(OSD). Press
to go to the next parameter.
2.
Region
: Use the arrow / buttons to select your Country. Press
to proceed.
CAUTION
If the wrong country is selected the channel scan may not detect all the channels available.
3.
LCN Mode
: When the Logical Channel Numbering option is active, the channels will be positioned in the
list with the broadcaster order automatically after the scanning. Press
to go forward.
NOTE
If the LCN Mode is turn on, we suggest to not change the channel positions in the
TV/Radio Channel List
menu.
4.
Tuner Setting
(Antenna Power): If you have an active antenna press / to power the antenna, this is
necessary when, for instance, an indoor amplified antenna that is powered by the receiver.
CAUTION
With a traditional antenna, like typical rooftop models, or an independently powered antenna, the antenna power option
must be set to off: RISK OF OVERLOAD.
5.
Auto Scan
: Press OK to start the automatic channel scan. When the scan is completed, the receiver will
enter the viewing mode.
6.
Additional Settings
: Also check and set properly the receiver clock, such as the
Summer Time
option
(par. 0), and the function of channel auto scan during stand-by (par. 4.3).
4 Receiver
settings
The first time installation procedure (chapter 3) will allow the receiver to be used with its basic functions.
However the receiver offers many more advanced features and options that are illustrated in the following
sections.
4.1 Password
To modify some settings and view certain channels locked by the end-user in the
Channel
menu, a
password has to be entered. The factory set password is “
0000
” (four zeros) but it can be changed by
pressing MENU and selecting the
Setup
menu and then
Parental Lock
.
CAUTION
Take note and keep the new password in a safe place. If you forget your personal password, use the universal code
“
3330
” to access the
Parental Lock
menu and set a new Password.
4.2 Advanced Menu Protection (Hotel Function)
The
Hotel Function
is a hidden utility, which consists in an advanced protection of the receiver. In particular,
it hides the menu and allows the user to use basic functions, such as channel zapping an audio volume
regulation.
During viewing mode, using the remote control, press RED button and input the system password (par. 4.1)
right away to enable/disable that function. Then, an information banner will appear on screen.
4.3 Channel scan
To access the channel scan function from the viewing mode, press MENU on the remote control to open the
main menu, select
Installation
and then one of the following menus:
Auto Scan
or
Channel Scan
.
Auto Scan
Automatic scan of all digital terrestrial channels received in the area by your antenna. The parameter are:
1.
Scan Mode
: Selection of channel type, between
All
or
Free
to air services. Press OK on
Search
to start
the scan of new available channels through whole frequency range UHF and VHF bands.
2.
Standby Mode
: Enable (
On
)/disable (
Off
) the automatic scan during standby mode. When active, thirty
minutes after standby, the receiver will search for new channels. At the next switch on, an information
message will appear on screen.
Channel Scan
(for expert users)
Manual scan of a single channel. Set all needed parameters displayed on video, then press OK on
Search
.
4.4 Time setting
In the viewing mode usage, press MENU on the remote control to open the main menu. Select
Setup
and
then
Region and Time
. Three setting options are available under
GMT Usage
item:
