Tele System TS3010HD Скачать руководство пользователя страница 7

En

gl

is

TS3010HD 

1

 

Installation 

1.1

 

Safety Regulations 

We advise you to read the following advice concerning the safety regulations carefully in order to ensure  
safe use of the appliance. 

ELECTRICAL SUPPLY 

 

The receiver must be supplied by a 230V~, 50Hz current. 

 

Do not remove the cover. The inside of the appliance could contain higher voltages than that of the supply voltage 
which could endanger the user. High voltage is also present even when the appliance is on Standby. The receiver 
should be disconnected from the electrical supply before performing any intervention. Non-authorised removal will 
mean that the warranty is no longer valid! 

POWER CABLE 

 

Before installing the appliance make sure that the cable is intact, paying particular attention to its connection to the 
power  supply  and  to  the  receiver.  If  the  cable  is  damaged  do  not  attempt  to  connect  the  appliance  and  refer  the 
problem to an authorised center for assistance.    

 

When installing the cable make sure that it can not be flattened in any way by items placed above or next to the 
appliance. Avoid placing the cable in an area where it could accidentally be stepped on, removed from the wall or 
damaged in any way.   

 

If  the  cable  is  damaged  in  any  way,  carefully  disconnect  the  receiver  from  the  power  supply  and  refer  to  a 
specialised technician or the center for assistance to get a replacement. 

LIQUIDS 

 

Keep the appliance far from any liquids. Do not place any objects containing liquids on the appliance, such as  

 

vases, humidifiers, etc. The appliance must not be installed in areas where it could come into contact with  

 

sprays or drops of water or in an environment with a high level of humidity where condensation could occur.    

 

If the receiver should accidentally come into contact with liquids, disconnect it immediately from the wall. DO  

 

NOT TOUCH the receiver until it has been disconnected. 

SMALL OBJECTS 

 

Keep the receiver away from coins or other small objects. Objects which fall into the appliance via the ventilation 
gaps could cause serious damage. 

CLEANING 

 

Before cleaning, disconnect the receiver from the power supply.   

 

To clean the outside of the receiver use a soft and dry or slightly damp cloth. Avoid using products which contain 
chemicals or solvents.   

VENTILATION 

 

Make  sure  that  the  area  where  the  appliance  is  to  be  installed  has  good  air  circulation  so  that  the  heat  can  be 
dissipate well in order to avoid overheating.   

 

In order to allow enough ventilation it is necessary to have a distance of at least 10 cm on either side of the appliance 
and 15 cm above the appliance.  

 

The vents must be kept clear from any obstructions such as newspapers, tablecloths, furniture material, curtains, 
carpets, etc.   

 

Avoid installing the receiver close to any heat sources (i.e. radiators, stoves, etc.) or on top of any other appliances 
which omit heat (i.e. video recorders, DVD players, etc.). 

WARNING! 

 

Keep the appliance out of reach of children. 

 

The  plastic  bags  used  for  packaging  can  be  dangerous.  To  avoid  suffocating  keep  the  bags  out  of  the 
reach of children. 

 

Do not expose the receiver or remote control to direct sunlight. 

 

The appliance must be placed on a solid and stable base. 

 

Connect the receiver to the power supply only after installation is complete. 

 

Dispose of the product correctly so as to avoid damage to the environment and human health as well as to facilitate 
recycling of the components/materials used in the appliance. If the product is not disposed of properly this could be 
punishable according to the existing law. 

 

The manufacturer recommends that the parts be recycled separately and be taken to sites which conform to current 
regulations. 

 

When no longer usable, take the product (including accessories and batteries), which must be kept separate from 
regular household waste, to a collection point authorised to handle waste from electrical or electronic appliances. 
Otherwise, it is possible to return the used or unusable appliance to your distributor when you decide to purchase a 
new one. 

Содержание TS3010HD

























Отзывы: