Tele System TS3010HD, Руководство пользователя

Страница: 18 / 24

TELE System
12
3.3.2 DB management
The Database management allow you to download or upload the channels list by USB device.
1.
Load from USB
: press OK button to upload the channel list from USB device.
2. Backup to USB : press OK button to download the channel list inside an USB device.
3.4 Time
The Time menu allows you to se the date/time of the receiver for correct interfacing with the antenna signal, to set the
Auto power down and OSD disappearance.
1.
Time offset : set Auto to automatically regulate the time according to Greenwich Mean Time (GMT).
2.
Time Zone
: regulate the time based on the local time difference with respect to GMT.
3.
Date
: available only when the
Time Offset
is set to
Manual
4. Time: available only when the Time Offset is set to Manual
5. Sleep: after the time specified of user inactivity, the receiver will automatically go on Standby.
6. OSD off: set the duration of the channel information banner
3.5 Option
The Option menu allows you to setup the general system of your receiver, configure the receiver for correct interfacing
with the antenna and external audio/video devices
The following parameters are available:
1.
OSD/Subtitles/Audio Language
: select the OSD and main audio and subtitles languages from the menu.
2. Digital Audio : select the digital audio output OFF, PCM, RAW (HDMI) and RAW.
3. Audio Description : enable the Audio Description narration (if it is transmitted by broadcaster).
3.6 System
1.
Parental Guidance
: the parental lock function allows for the viewing of sensitive material to be controlled. If a
channel transmits a program with view control aimed at a public of the same age or older than the age level
previously selected from the menu, the receiver will block the channel. A message will appear on the screen
requesting that the PIN number be entered to unlock the channel
2.
Set password
: modify system password
CAUTION!
•
Default password is 000000.
•
If you have forgotten your password, please contact your local retailer.
3. Restore Factory Default : resets the receiver to its factory settings.
CAUTION!
Factory reset means you will lose all personalised settings and all the channels previously stored.
4.
Information : shows some information about the receiver, such as Model, SW version and HW version
5. Recall list : if set to off, by pressing the Recall button on remote control, the receiver returns to previous channel,
while if it is set to ON, recalls the list of the last tuned channels.
6. Software Update: Since your receiver is made to last, the time may come when its software needs to be modified
or improved by updates. These updates will optimise the receiver’s functions or correct minor flaws. The software
for this receiver can be updated in the following way:
a.
Update by USB : Updates the receiver using a USB connected memory device
b.
OTA
: Updates are distributed directly to all receivers by satellite. The receiver can detect and download a new
software version. If necessary, the factory set parameters of the receiver can be modified (recommended for
expert users).
3.7 USB
The USB port on the front of this receiver allows for multimedia files to be read and for unencrypted digital satellite
programs to be recorded.
CAUTION!
The receiver is compatible with USB memory devices formatted with FAT32 file systems.
To work properly, some hard disks that are auto-powered via USB could require an external power supply.
Full compatibility with all USB memory devices on the market is not guaranteed.
The use of a device with at least 16 GB of free (unused) memory is advised.
USB memory device connection