TS09 T2HEVC
4 First start-up of the TV
After connecting the TV to the mains socket using the supplied adapters and once the battery charging phase has been completed using the AC / DC adapter
supplied, the device must be switched on using the appropriate ON / OFF button on the side. At this point, if the status LED is RED, point the remote control at
the LED and press the POWER button (the LED will turn GREEN). After a few moments, the first installation menu will then be displayed where you will have to
confirm or modify some parameters as described below:
1.
Tongue:
Using the arrow keys ◄ / ► / ▼ / ▲ select the desired On Screen Display (OSD) language.
Press the button
OK
to continue with the next setting.
2.
Country:
Press the arrow keys ◄ / ► / ▼ / ▲ to change the country of installation. Go to the parameter
next using the key
OK.
ATTENTION
Incorrect country setting can lead to incomplete or missed channel detection.
Personal password:
this 4-digit password will be the user's personal password. The user must enter this password to view any blocked channels and / or
to access some menu features
ATTENTION
Should the user forget the password entered during the first installation, it will always be possible to perform a factory reset in order to select a new
password.
After completing your choices, press the OK button to start the automatic channel search. At the end of the scan, the TV will automatically switch to viewing
mode.
NOTE
The television is set up to use the LCN function (Logical Channel Numbering) which allows the automatic sorting of the channels according to the national order
of the television operators.
3.
5 Main menu
The first installation procedure already allows the basic use of the TV.
Through the main menu accessible by pressing MENU, more advanced potentialities and customizations are available, which are briefly described in the
following paragraphs The main menu is divided into six submenus:
Image:
management / customization of image quality.
Sound:
management / customization of sound quality.
Schedule:
allows you to configure time options and sleep timers.
Options:
provides some useful tools for using the TV (such as language, audio and subtitle options and factory reset).
Block:
this submenu allows you to block some menus of the receiver or some specific TV programs / channels.
Channel:
this submenu allows you to perform an automatic (or manual) channel search or to modify the channel list.
Navigating through the menus is simple and intuitive. Use the cursor (arrows and OK) and numeric keys on the remote control.
•
•
•
•
•
•
5.1 Installation
During the first installation, an automatic search for all available channels is performed.
However, it may be necessary to carry out searches following the first one, such as when new channels are activated by the television operators, or when existing
channels are moved to different frequencies.
To access the channel scan function, from viewing mode, press the MENU button on the remote control, select the menu
Installation
and choose one of the
following items, depending on the desired scan mode:
or
Automatic Search
Automatic search of all digital terrestrial channels detectable in the area with your own antenna system.
8
Содержание TS09 T2 HEVC
Страница 1: ......
