TELE System
the side switch.
2.
No Video signal or - No or weak antenna signal. Audio
- Cable
antenna
disconnected
damaged.
- Low or no audio volume.
- The selected channel does not broadcast audio /
video content
- The selected channel is an HD or SD channel with
scrambled channels.
3.
The channels do not come - No or weak antenna signal. uploaded
antenna system.
- Tune in a different channel among the SD ones in Scan
channels by changing
- Perform a manual channel search on the selected frequency
using the menu
- Before exiting the menu, press any change made.
infrared sensor.
- Check the correct insertion of the
- Contact your dealer for purchase
- Disconnect the power supply for at least one time by switching it
back to ON ..
chapter.
through a factory reset of the device.
- Check the time of the channel on which you are pressing the
INFO button. If the time is wrong correct.
television. Try switching devices. technical features. Other
formats might feature.
outside the TV to check if they are
- If you do not want this function enter the
adjustments - Failure to confirm after a change
not
conveys the correct information
- The time of the receiver is not set
files
- The file is damaged or is
- The file format is not supported or is
10.
One is required
channel.
alone.
- Sensitive control is active in the factory.
automatic shutdown of the TV inactivity.
automatic or manual search
press the POWER button.
activate deactivate it from the relative menu.
user stores in the conditions
personal data of the user
been lost
INFO the time does not appear
wrong.
forward or backward.
- Consult the manufacturer's website to contact the nearest
service center.
- Scan the channels by changing position.
- Check the antenna cable and the connection to it. Contact
your technician
- Adjust the volume of the TV and receiver. clear.
position.
checking signal strength and quality Manual search.
confirmation button to make the
or
4.
The
have not been set. stored.
5.
The remote control is not - The remote control is not pointed at the function.
infrared sensor of the receiver.
- The batteries are exhausted.
- Batteries not inserted correctly.
- The remote control has been dropped and its
components have been damaged.
Non-Momentary lockout of the TV
- Check that there are no obstacles in front of the
- Replace the batteries.
batteries.
of a new remote control.
minute and then reset it by turning OFF and
- Consult the suggestions in point 5 of this
- It is always possible to reset the password
- Adjust the TV system time. intends to leave the TV tuned to
select another channel with time
- The memory is not compatible with the
- Supported formats are listed to be read but perfect is not
guaranteed
- Try reading the file on an accessible computer.
relative menu and deactivate the function.
- To wake up the TV from auto switch off
- If you don't want this function to be
- The
activities
previous
report
the
initials by removing the contents of the memory.
not
password for parental access to block content
11.
The TV switches off - A system is factory set
after a certain period of time
settings - A previously performed
6.
The
interacts with the buttons of the -Problems with the remote control. TV remote.
television
7.
You forgot the
Password.
8.
The on timers and / or
shutdown
work properly.
- The
on the timetable.
correctly
- Incompatible memory
damaged the codec.
partially supported.
9.
Playback is not possible
gods
multimedia
present
in memory
program
interested
12.
The
channel management are - A factory reset has been performed
13.
Press the button - The channel sends information - Tune one of the main channels a
increased spread and double check.
correct.
- There is a time lag of one hour - The summer time setting is required
in the menu
Schedule
11
Содержание TS09 T2 HEVC
Страница 1: ......
