Tele System All in One 58040107, Быстрое руководство

Страница: 7 / 64

TELE System
5
4. To get the first digit of the code, press singularly the numeric button from 0 to 9 until
the TV LED
TV LED TV LED TV LED blinks once. The number that lights up the TV LED TV LED TV LED TV LED corresponds with the
searched digit.
5. Repeat the above step 3 times in order to find the remaining three digits of the code.
6. After having the last digit of the code, the TV
TV TV
TV LED
LED LED
LED will turns OFF.
NOTE NOTE NOTE NOTE
When the TV
TV TV
TV button is not programmed the default code is 1003
1003 1003
1003....
5.4 5.4 5.4 5.4 Setup by learning function Setup by learning function Setup by learning function Setup by learning function in the TV mode in the TV mode in the TV mode in the TV mode
The learning function is used to extend the default programs of the standard TV code list
(see the list at the end of user manual), thanks to the Learning function. A fully functional
original remote control of the TV set is required. Please also use new batteries for both
the original TV remote control and the Learning remote control.
1.
Align the IR sensors of both remote control units and keep them so at a closed distance
(around 25 mm) for all the procedure.
2. Press and release the TV
TV TV
TV button.
3. Simultaneously press and hold both the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE buttons for approx. 3
seconds until TV TV TV TV LED LED LED LED indicator will be stay on. Release then the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE
buttons.
4. Enter the 4-digit code 8700
8700 8700
8700 using the numeric keys 0-9. The TV LED
TV LED TV LED
TV LED is switched on.
5. Press and release the button of the ALL.IN.ONE to be taught (learned) with the original
remote button command. Please note TV
TV TV
TV and STB
STB STB
STB are not programmable buttons. The
TV LED TV LED TV LED TV LED is switched on.
6. Press and hold the original remote unit button until the TV LED TV LED TV LED TV LED indicator blinks off
once. Then release the button. If there is a mistake the LED TV will flash for 3 seconds
staying in learning mode. Repeat 4-5.
7. Repeat the steps 5 and 6 for all the other buttons to learn from the original remote
control.
8. When you finish learning all needed buttons, press the TV TV TV TV button to save all commands
you have learned correctly from original remote control. The TV LED TV LED TV LED TV LED turns off.
CAUTIONS
CAUTIONS CAUTIONS
CAUTIONS
•
Every button keeps the learned function even after changing the TV program code. To
cancel all learned keys see the section 5.5. The TV
TV TV TV and STB STB STB STB key of ALL.IN.ONE ALL.IN.ONE ALL.IN.ONE ALL.IN.ONE are not
programmable.
•
The capturing is not immediate, it may take some seconds.
5.5 5.5 5.5 5.5 Deleting of the learnt keys from original TV remote unit Deleting of the learnt keys from original TV remote unit Deleting of the learnt keys from original TV remote unit Deleting of the learnt keys from original TV remote unit
To delete all the codes set for the TV button, proceed as follows:
1.
Press and release the TV TV TV TV button.
2. Simultaneously press and hold both the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE buttons for approx. 3
seconds until TV LED TV LED TV LED TV LED indicator will be stay on. Release then the buttons.
3. Enter the four digit code 8899
8899 8899
8899 using the numeric buttons 0-9. The TV LED
TV LED TV LED
TV LED blinks for
each button press and after turn off.
CAUTION CAUTION CAUTION CAUTION
A reset will cancel any learned keys in TV mode from original remote unit and restore the
full functionality of the four digits code chosen previously from TV code library.
E
n
g
lis
h