Tele System All in One 58040107, Быстрое руководство

Страница: 6 / 64

ALL.IN.ONE
4
5
5 5
5 Remote control programming
Remote control programming Remote control programming
Remote control programming
5.1 5.1 5.1 5.1 Programming by predefined TV brand codes Programming by predefined TV brand codes Programming by predefined TV brand codes Programming by predefined TV brand codes
The default TV brand codes are listed at the end of this user manual. Detect the brand of
your TV set, then follow these steps:
1.
Make sure your TV device is switched on (not in stand-by).
2. Press and release the TV TV TV TV button.
3. Simultaneously press and hold both the POWER
POWER POWER
POWER and MUTE
MUTE MUTE
MUTE buttons for approx. 3
seconds until TV LED TV LED TV LED TV LED indicator will be stay on. Release then the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE
buttons.
4. Enter the 4-digit TV/STB brand code (from the lists) by using the numeric buttons 0÷9.
5. The TV LED TV LED TV LED TV LED will turn off if the remote control accepts the code after the four digits.
CAUTION CAUTION CAUTION CAUTION
If the code is wrong, the LED will flash 3 times and turn off; in this last case, repeat the
procedure.
6.
Check the functions of the buttons of the remote control. If it does not function
correctly, try another 4-digit TV set code from the list under the same brand by
repeating the steps from 1 to 5 until all basic functions operate correctly.
If the TV brand is not present in the list or the setup is unsuccessful, try the next method.
5.2 5.2 5.2 5.2 Setup by manual search Setup by manual search Setup by manual search Setup by manual search in the TV code library in the TV code library in the TV code library in the TV code library
1. Make sure your TV device is switched on (not in stand-by).
2. Press and release the TV
TV TV
TV button.
3. Simultaneously press and hold both the POWER
POWER POWER
POWER and MUTE
MUTE MUTE
MUTE buttons for approx. 3
seconds until TV LED
TV LED TV LED
TV LED indicator will be stay on. Release then the buttons.
4. Point the remote control at the television to be controlled and press PROG+ PROG+ PROG+ PROG+ (or
POWER POWER POWER POWER) once. After a few of seconds the remote starts stepping through the code
library (fast search, 1 code for second).
5. You can press PROG+ PROG+ PROG+ PROG+ (or POWER POWER POWER POWER) a second time to switch to slow search (slow
search, 1 code any 3 seconds).
6. You can press PROG
PROG PROG
PROG+
++
+ (or POWER
POWER POWER
POWER) repetitively to carry out a manual search.
7. If your code is accidentally passed, then press PROG PROG PROG PROG---- to backtrack through the library.
8. As soon as the TV set responds to the command, by going in stand-by or changing
channel, press the OK
OK OK OK button to save the code. The TV LED TV LED TV LED TV LED will turn OFF.
9. Check whether the other buttons of the remote control function properly. If the
majority of the buttons does not function correctly, repeat the procedure starting from
the first step.
5.3
5.3 5.3
5.3 To identi
To identi To identi
To identiffffy
y y
y the TV brand code
the TV brand code the TV brand code
the TV brand code programmed
programmed programmed
programmed
To identify the TV brand code in use by the remote control, follow these steps:
1.
Press and release the TV TV TV TV button.
2. Simultaneously press and hold both the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE buttons for approx. 3
seconds until TV LED TV LED TV LED TV LED indicator will be stay on. Release then the POWER POWER POWER POWER and MUTE MUTE MUTE MUTE
buttons.
3. Press shortly POWER POWER POWER POWER and MUTE MUTE MUTE MUTE together and the TV LED TV LED TV LED TV LED flashes three times.