End user instructions│ R20│ Chapter 1: Introduction
1 .1 Abou t this docu ment
Before installing or operating the product, read the corresponding documentation
carefully.
Tele Radio AB's product range is composed of transmitters, receivers, and accessories
intended for use together as a system.
R20 systems are mainly intended for the hydraulic and mobile equipment markets. These
systems are not standardized but customized and adapted to each customer's needs.
How the outputs are connected to control the object depends on each specific installation
and will not be covered in this document. For exact details, see the technical
documentation provided for your specific system. Drawings, schematics and connection
diagrams are unique and are also provided together with the system. Images shown in
this document may therefore not show the exact position of buttons, paddles and are for
illustrative purposes only.
These End user instructions cover main technical specifications, standard operating
instructions.
Please report any error or omission in this document, as well as any improvement or
amendment suggestion to [email protected].
1 .1 .1 C O PYRI G H T
Information in this document is subject to change without notice. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, photographic, mechanical (including photocopying), recording
or otherwise for any purpose other than the purchaser's personal use without the written
permission of Tele Radio AB.
1 .1 .2 T ERM A N D S YMB O L DEF I N I T I O N S
The capitalized terms and symbol used herein shall have the following meaning:
l
WARNING: indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
l
CAUTION: indicates a hazardous situation which, if not avoided, will result in
minor or moderate injury.
l
IMPORTANT: is used for information that requires special consideration.
l
NOTE: is used to address practices not related to physical injury.
This symbol is used to call attention to safety messages that would be
assigned the signal words "WARNING" or "CAUTION".
ED-PM-RX102-EN-v02
5