Tele Radio Panther PN-R15-13 Скачать руководство пользователя страница 3

Chapter 1: CUSTOMER INFORMATION

CHAPTER 1: CUSTOMER INFORMATION

 

THANK YOU FOR PURCHASING A TELE RADIO AB   PRODUCT

 
READ ALL INSTRUCTIONS AND WARNINGS CAREFULLY BEFORE MOUNTING, INSTALLING 
AND CONFIGURATING THE PRODUCTS.
 
These instructions are published by Tele Radio AB and are not subject to any guarantee. The 
instructions may be removed or revised by Tele Radio AB at any time and without further notice. 
Corrections and additions will be added to the latest version of the instructions. Keep this manual and 
the safety instruction for future reference.
 

IMPORTANT! These instructions are directed to installers. The instructions containing 
information about the installation and configuration of the radio remote control unit on 
the machine are not intended to be passed on to the end user

. Only information that is 

needed to operate the machine correctly by radio remote control may be passed on to the end user.
 
Tele Radio remote controls are often built into wider applications, please refer to the applicable local 
regulations for installation requirements.
 
 
Tele Radio AB products are covered by a guarantee/warranty against material, construction or 
manufacturing faults. During the guarantee/warranty period, Tele Radio AB may replace the product or 
faulty parts. Work under guarantee/warranty must be carried out by Tele Radio AB or by an authorized 
service center specified by Tele Radio AB. Contact your Tele Radio AB representative if you need 
support or service.
 
©Tele Radio AB
Datavägen 21
SE-436 32 ASKIM
SWEDEN
Tel: +46-31-748 54 60
Fax: +46-31-68 54 64
www.tele-radio.com
 
 

-

3

-

Содержание Panther PN-R15-13

























Отзывы: