Chapter 4 Connecting the router
This chapter describes how to connect the Regesta Smart PRO router to Ethernet devices and networks. This
chapter contains the following sections:
•
on page 19
•
on page 21
•
on page 26
•
on page 28
•
on page 28
•
on page 29
4.1 Power Source
Note
Please read the following instructions carefully before connecting the router!
4.1.1 Power Connector pins
The power connector is located in the connector panel.
Fig. 14:
Power Supply Connector
Depending on the model, the Regesta Smart PRO can be DC or AC-powered.
Note
Please check that the device's power input is compatible with your power supply.
The power connector on this router is a 2-wire terminal block 5.08 mm pitch.
The connector has 2 terminals for both AC (AC version or AC-powered MR version) and DC powering (DC version or
DC-powered MR version).
Teldat S.A.
4 Connecting the router
Regesta Smart PRO
19
