• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
Note: Some LEDs may behave differently depending on how the device is configured.
2.4.2 Connector Panel
The following figure shows the connector panel. This panel includes all the connectors on the Regesta Smart PLC
router.
Fig. 4:
Connector Panel
The connector panel elements are as follows:
Table 1: Front Panel Elements
Item
Description
B
CONF. RJ-45 connector providing access to the device's local console for configuration and
monitoring purposes. (This connector can also be used as an RS-232 asynchronous DCE
serial port.)
For more information about the CONF connector, refer to:
-
Console Connector as Serial Port (CONF connector)
on page 22
-
on page 33
-
on page 36
C
WAN Gigabit Ethernet. SFP connector.
For more information about the WAN interface with SFP connector, refer to:
-
on page 19
Teldat S.A.
2 Product Overview
Regesta Smart PLC
9
The connector panel is covered by a protective case. You have to remove this case to access the the connector pan-
el. For further information on how to remove/install the protective cover, please, see
on page 12.
A
RST. Reset button. For further information on how the reset button works, please see
on page 25.