Fig. 49:
Nets – Interfaces.
The page is divided into the following sections:
(a)
Interface configuration
Through the
Add
button, you can add Ethernet subinterfaces and GRE interfaces by selecting the base interface
from the pull-down menu and specifying an identifier.
Fig. 50:
Interfaces – Interface Configuration –Ethernet Subinterfaces.
Fig. 51:
Interfaces – Interface Configuration –GRE Tunnels.
(b) )
VLAN configuration
Allows you to configure VLANs in the device, indicating the interface and the ports that will be members of each
of them.
•
Adding and configuring a VLAN
To do this, select the interface from the pull-down menu, check the ports you wish to associate to the VLAN
and click on
Apply
. To cancel any modifications made, click on
Cancel
.
Fig. 52:
Interfaces – VLAN configuration – Adding and configuring a VLAN.
•
Editing a VLAN configuration
Select the interface from the pull-down menu and, once you have made the appropriate changes by checking/
unchecking the ports, click on
Apply
.
If you wish to cancel the changes you have made and return to the information the device had on said VLAN,
Teldat S.A.
2 Web Interface
Regesta-PLC
21