Fig. 41:
SNMP – Hosts – Adding and configuring a host
•
Editing a host configuration
To execute this, select the host from the pull-down menu and (once you have made the appropriate changes)
click on
Apply
. This section allows you to modify all data except the host IP address.
To cancel the changes you've made and return to the information the device had on said host, click on
Cancel
.
Fig. 42:
SNMP – Hosts – Editing the configuration for a host.
•
Removing a host
To remove a host, first select it from the pull-down menu and then click on
Remove.
Fig. 43:
SNMP – Hosts – Remove a host.
(b)
Community Subnet
Allows you to define the subnets where SNMP petitions can be executed.
•
Adding and configuring a subnet
To add a new subnet, select the
New Subnet
option from the pull-down menu, indicate its IP address and sub-
net mask then click on
Add
.
Fig. 44:
SNMP – Community Subnet – Adding a subnet.
Teldat S.A.
2 Web Interface
Regesta-PLC
19