Teldat M12AB, Инструкция по эксплуатации

Страница: 5 / 15

5
Message length setting
In on-hook or off-hook state press SET key to enter the setting menu, then press UP key six
times, LCD will display MESSAGE LENGTH. Press ENTER key, LCD displays MESSAGE
LENGTH 1, using UP or DOWN to select the message length at 1 - 2 minutes, press ENTER to
confirm.
Ring times to Auto-Answer setting
In on-hook or off-hook state, press SET key to enter the setting menu, then press UP key seven
times, LCD will display RINGS TO ANSWER. Press ENTER key, LCD displays TOLL SAVE,
using UP or DOWN to select the ring times among 2
～
9 and TOLL SAVE, press ENTER to
confirm.
NOTE: When a call is coming, the machine will answer the call automatically after ringing (2
～
9)
times depending on above setting. Or if you select TOLL SAVE, then the ring times to
Auto-Answer is 2 when there are new messages, and the ring times is 4 when there are no new
messages.
Remote access code setting
In on-hook or off-hook state, press SET key to enter the setting menu, then press UP key eight
times, LCD will display REMOTE ACCESS. Press ENTER key, LCD displays REMOTE
ACCESS 321 and the 3 flashes, use UP or DOWN to edit the first access code and press
ENTER to confirm. Edit the rest access code by same way.
Incoming call number announcement setting
In on-hook or off-hook state, press SET key to enter the setting menu, then press UP key nine
times, LCD will display VOICE CALL. Press ENTER key, 0 flashes, use UP or DOWN to select
the announcement times from 0~3 and press ENTER to confirm.
NOTE: If select 0, which means announcement function is Off, the answering machine will not
announce the caller’s number when a call comes.
If select 1~3, the answering machine will announce the caller’s number for 1~3 times.
Set recording voice of ICM muted or not
In on-hook or off-hook state, press SET key to enter the setting menu, then press UP key ten
times, LCD will display SCREEN ON. Press ENTER key, and then use UP or DOWN to select
SCREEN ON or OFF and press ENTER to confirm.
NOTE: The function is used for whether we (Host of the answering machine) can hear the
recording voice when the caller is leaving an ICM message to the phone.
When select OFF, caller’s voice will be muted, then we can’t hear the ICM voice which is being
left by the caller, only the message will be stored in the memory to check.
But when select ON, the answering machine will not mute caller’s voice, then we can hear the
ICM voice which is being left by the caller, so that we can decide whether answer the call at once
by recognizing his or her voice.