established:
- Steady: Is not transferring
data.
- Blinking: Transferring
data.
3.2 Mounting options
The Teldat H2 Automotive device can be mounted in various vehicles on the wall, ceiling or on a horizontal surface.
The front and rear panels have two openings where you can add a bracket with slots to firmly hold the device in
place.
Fig. 4:
Front panel bracket mounting
3.2.1 Assembly: Recommendations
We recommend that the device is mounted on a horizontal surface and that it is screwed to this surface using the
bracket slots.
For the mounting to be secure, we recommend using the following screws:
• For sheet metal installation, use #8 self-drilling screws.
• For tapped holes, use M4 machine screws.
Warning
If the screws are not properly anchored, the strain of the cables connected to the router could pull the
router out.
Note
The assembly screws are not provided with the router and must be purchased separately.
Teldat S.A.
3 Components and Power Supply
Teldat H2 Automotive Router
7
