elmeg IP120 / en / elmegIP120_v1 / connectivity.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
62
elmeg IP120
Teldat
Configuring settings for the local network
VLAN tagging
A local network can be divided into logical subnetworks, so-called VLANs (Virtual Local Area
Network, standard IEEE 802.1Q). Multiple VLANs share a physical network and its components,
e.g., switches. Data packets of a VLAN are not forwarded to another VLAN. VLANs are often used
to separate the data traffic of different services (Internet telephony, Internet TV, ...) and to define
different priorities for the data traffic.
You can operate your phone and a PC connected to your phone’s PC port in two different VLANs.
You enter the VLAN identifiers (VLAN tag) here, which you get from your network operator.
‰
¢
Settings
¢
Local Network
Warning
u
If you operate the PC and the phone in different VLANs, you can no longer access the
phone’s Web configurator directly from the PC.
If you enter an incorrect value here, you must reset the phone to its default settings
(
). After this you must re-establish phone access to the local network.
s
Select
VLAN Settings
.
§§OK§§
Press the display key to confirm the selection.
r
Select the required setting:
No
If you do not use VLAN (default).
LAN Port only
If you operate the phone and the PC within
the same VLAN.
LAN and PC Port
If you operate the phone and the PC within
different VLANs.
§§OK§§
Press the display key to confirm the selection.
~
Enter the
VLAN Identifier
and confirm with
§§OK§§
.
Value range: 1 – 4094
r
Define the priority for the different services
and confirm with
§§OK§§
.
Values: 1 – 7
§§OK§§
Press the display key to confirm the settings.
Local Network
Back
OK
Pref. DNS Server
Altern. DNS Server
VLAN Settings
VLAN Settings
Back
OK
VLAN Tagging
LAN Port only
VLAN (LAN Port)
Back
OK
VLAN Identifier:
1024
Voice VLAN Priority:
