elmeg IP120 / en / elmegIP120_v1 / telephony.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
39
elmeg IP120
Teldat
Making calls
Call swapping
You are speaking to one participant and a second is on hold; this may be because you have
accepted a waiting call or have placed one caller on hold.
J
Press the consultation key to swap from one caller to the other.
Initiating a consultation call with a third participant:
§§Add Part.§§
Press the display key. Both participants are placed on hold.
~
Enter the phone number for the third participant.
§§Dial§§
Press the display key. The number is dialled.
To speak to one of the participants on hold again after you have finished the ringback:
q
Select the relevant participant.
J
Press the consultation key.
Initiating a conference
You are speaking to one participant while another is on hold.
q
Select the participant who is on hold.
K
Press the conference key to add the waiting participant to a conference.
Or
You are speaking to one or more participants and you wish to add an additional participant.
K
Press the conference key.
~
Enter the phone number for the additional participant.
§§Dial§§
Press the display key. The number is dialled.
As soon as the participant answers, they are automatically connected to the conference call.
The participants in the conference are listed on
the display.
Removing a participant from the conference
call:
q
Select the participant.
§§Remove§§
Press the display key to end the con-
ference for the highlighted partici-
pant.
§§Add Part.§§
Press the display key to begin a con-
sultation call with another partici-
pant. In contrast to conference key
K
. The conference participants
are put on hold.
Please note
Only participants who share the same VoIP account can participate in a conference call.
Remove
..345123456789099
..451234567890123
11:42
ž
Add Part.
Conference
via
§§1§§
Account 1
ž
]