4.4.3 AUX port connections
This port is used to locally configure and monitor the device. It allows an asynchronous terminal operating at 9.600
bps with no parity and with one stop bit (9600 8N1) to be connected. It is a female DB9 connector that acts as DCE,
thus allowing pin-to-pin connection with a PC asynchronous port or terminal.
DB9
DB9 PIN
Signal
3
2
5
7-8
1-4-6
TXD
RXD
GND
Joined Pins
Joined Pins
4.5 Technical specifications
Hardware architecture
PROCESSORS
Motorola MPC8260, at 300 MHz,
MEMORY
128 SDRAM Mbytes
STORAGE UNIT
FLASH Memory, 8 or 16 Mbytes depending on version
4 Appendices
Teldat S.A.
20
ATLAS 300 Installation Manual
