Giga Ethernet ATLAS 160 and 260 connectors
Giga Ethernet ATLAS 360 connectors
I - 2.2.2.
Connecting the antenna
ANT.
:
The
ATLAS X60
router has two connectors to connect to an external antenna
which improves the quality of the signal received and transmitted by the Wireless
LAN module. This module is optional and it’s possible that your device does not
have either a Wireless LAN or the antennas. To assemble and dismantle the
antennas, simply screw them into the connectors labeled ANT. These are located
on the rear of the device.
So that the Wireless LAN interface is operative, the device must have a plug-in
Wireless LAN card and the corresponding software license. Depending on the
model, the antennas are installed in the device at the factory. If your device does
not have the Wireless LAN module incorporated, you can obtain this later on.
The manual accompanying this module will indicate how to install it and the
corresponding antenna cables in the device.
Antenna connector for the Wireless LAN ATLAS 160 and 260
Antenna connector for the Wireless LAN ATLAS 360
ATLAS X60
Installation
I-5
Doc.
Dm695-I
Rev.
1.0
