TELCOSAT RPT 900
Document use is restricted to that described on cover
4
SAFETY SUMMARY
High voltage is used in the operation of
this equipment. Death on contact may
result if personnel fail to observe the
following safety precautions:
Only qualified trained personnel can install this equipment. Electrical connection and installation must
meet your local Electrical Safety Installation codes.
Prior to any maintenance or inspection of this device disconnect the power supply.
Do not remove covers or access plates on the equipment unless you are a trained technician and
authorized to carry adjustment and maintenance for this apparatus.
When installing antennas always be aware of high voltage overhead power lines. Contact with power
lines will result in severe injury and or death.
To prevent electrical shock or damage to the equipment, do not operate the repeater until you
thoroughly understand the operation and function of all controls, indicators, and connectors.
The RBB850 Repeater weighs approximately 25 lbs/ 12 kilograms. The repeater must be attached to the
appropriate supporting device using nuts, bolts and lock washers. Material grade, must be a minimum
Grade 5, 5/16th” (6mm) diameter and corrosion resistant.
FIRST AID
In case of electrical shock:
THIS PERSON COULD STILL BE IN CONTACT WITH ELECTRICAL POWER. DO NOT TOUCH THIS PERSON
BEFORE YOU INSULATE YOUR SELF FROM THE ELECTRICAL SOURCE.
Turn off the electrical power.
If you cannot turn off the electrical power, pull, push, or lift the person to safety using a dry wooden
pole, a dry rope, or some other insulating material. Do not use any metallic objects to move this person.
After the injured person is no longer in contact with the electrical source, obtain/perform immediate
medical attention.
