For correct, easy programming, it is essential that the following instruc-
tions are followed to the letter.
1. Preliminary operations
- Connect an antenna tuned to 433 MHz to the antenna terminal on the
receiver. Alternatively, diminishing the receiver specifications, a piece
of wire approx. 20 cm long may be connected
- Once the receiver has been connected to the control unit or the nec-
essary connections onto the terminal board have been completed,
switch on.
- As soon as the receiver is powered, it carries out an internal test,
shown by LED L2 coming on for 3 seconds.
2. Self-memorisation
- Upon pressing key P1 for an instant the relative led will blink 5 times.
- Within this period of time, transmit with the
radio control required for use.
- Fixed indicator lights lasting about 3 seconds
indicate that the code has been successfully
stored.
GB
29
V
12
MHz
433,920
KHz
+/-200
?
W
100
°C
-20+60
1.048.576
TRANSMITTER TECHNICAL DATA
u.m.
Battery power supply type GP 23A
Frequency
Stability
Radiated power
Operating temperature
Number of combinations
STANDARD PROGRAMMING
Содержание TANGO 2
Страница 3: ...3 I F E GB D NL Fig 1 Abb 1 Fig 2 Abb 2 ...
Страница 4: ...4 I F E GB D NL Fig 3 Abb 3 Fig 4 Abb 4 ...
Страница 5: ...I 5 Fig 5 Abb 5 Fig 6 Abb 6 F E GB D NL ...
